Incorrect or missing product information? Let us know
Please select the issue
Your feedback has been received! Thank you for helping us improve our site.
A new hub seal and bushing is supplied with Nukeproof freehubs. To avoid damage to the hub seal, turn the freehub anti-clockwise as you fit.
Please Note: The new hub seal will be fitted to the freehub for transport purposes. This needs to be removed from the freehub by pressing the pawls BEFORE fitting the freehub.
If you have a HG / XD hub and want to convert to microspline, you will need Nukeproof's microspline conversion kit which can be found here.
For step-by-step fitting instructions click here.
1. Remove driveside end cap
2. Pull off old freehub turning anticlockwise as you pull
3. Check hub seal for damage, if it is damaged remove the seal
4. If seal was removed, press on new seal
5. Apply grease hub ratchet ring
6. Apply thin grease to freehub pawls & springs then push onto hub shell turning anticlockwise
7. Refit driveside end cap
The delivery options available for shipping this product along with the contents of your basket to USA are:
We will happily refund any item purchased on Wiggle if returned to us within 365 days; excluding Wiggle gift vouchers, nutrition and customised products, except when faulty.
Please note: Bikes and other bulky items cannot be returned using our local returns service (where applicable). Please contact us and we can arrange to collect these from you using our discounted courier rates. There is a fee for all collections, except for faulty products.Returned goods must be unused and supplied with their original packaging, unless the goods are faulty. Wiggle will pay the return postage costs for any faulty items.